Essential things in your home, such as family and valuable possession, require protection. At your house, the mainline of defense is your door. A wrong option of the door may make your building vulnerable to intrusion. It is estimated that every year, approximately two million houses being burglarized. Door reinforcement is necessary to protect whatever is inside the building. This article revolves around how you should reinforce you're your door; this will prevent forced entry and kick in.
What makes your entry door vulnerable? Several issues make your door easy to break-in. There could be a thin strip of the wood on which the place is attached. There could be a hung on a lightweight jamb. When an intruder is kicking such a door, a sudden force will make the jamb to splinter. You might have an excellent installation of the door and the lock, but the jamb is making it vulnerable to the intrusion.
To address this issue, you start reinforcing your door. Reinforcement is done both on the door frame and the strike plate. The lock latch is held by the strike plates. The main problem with these plates is that they have affixed to the door jamb with the weak screws. This means that these screws are unlikely to withstand sudden strong force. To increase the security of your door, you should consider replacing the screws with stronger ones (preferably 3 inches screws). Such longer screws can withstand extreme kick in.
Once you are done with the strike plates, you should then focus on the door flames. You should commence by removing the inside trim that surrounds the jamb (it is found on the latch side of the frame). Chisel and fix the building plate so that it covers most of the edge of the jamb. It is vital to ensure that the jamb is approximately an eight-inch from where the edge is. The entire process of reinforcing the door frame requires dexterity tools and expertise. You should, therefore, consider looking for a professional company that specializes in security door reinforcement.
It is paramount to ensure that you install stronger door locks. In the market, you are going to find locks of different grades; they are usually graded, e.g., grade1, grade3, and many more. Grade 3 is the worst since they even contain plastic parts and other cheap materials. In the case of lock bumping, these locks are going to offer minimal resistance. When you are shopping for a lock, make sure that you choose the one which has the lowest grade; this means that grade 2 is more reliable compared to grade 2. If your entry doors have grade 3, do not hesitate to replace them.
The process of replacing the old deadlock is simple. All you need is to unscrew and remove them. However, there are several things that you ought to understand before you purchase another lock. Ensure that you know the size of the lock hole. Also, you should know the backset distance.